3-in-1 EC/TDS/Temperature Meter

General Description

This digital meter is a necessity instrument in hydroponics planting system. The digital meter does the water measurement well in any hydroponic systems, aquarium, swimming pools, laboratories, beverages, etc.

Product Features

Measurement Range: 0-9990 ppm, +/- 2% reading accuracy (changeable to EC)

Temperature: Measures water temperature, 32 - 176 F degrees (changeable to celsius)

Data Hold: Locks the measurement to view upon taking out of the water

Auto-off: Turns off meter after 5 minutes inactivity to conserve batteries

Weight: Small and light at only 68g

Product Specifications

Colour: White

Weight: 68g

Size: 15.5cm (L) x 2.8cm (W) x 1.5cm (H)

Battery: 1 x 3V button cell battery (included)

Casing: PVC leather casing (included)

EC Level Recommendations

1. For green leafy vegetables, it is recommend to maintain between 1.5 - 1.8 EC.

2. For flowering & fruiting plants, it is recommended to maintain 1.8 - 2.0 EC during normal period and between 2.0 - 2.5 EC during flowering or fruiting period.

3. To increase your EC level, increase the amount of fertilizer in your water tank.

PH Meter

General Description

This digital meter is a necessity instrument in hydroponics planting system. The digital meter does the PH water measurement well in any hydroponic systems, aquarium, swimming pools, laboratories, beverages, etc.

Product Features

Measurement Range: 0 - 14.00 PH, +/- 1% reading accuracy

Auto-off: Turns off meter after 5 minutes inactivity to conserve batteries

Weight: Small and light at only 68g

Product Specifications

Colour: Yellow with black tip casing

Weight: 50g

Size: 15.5cm (L) x 3.1cm (W) x 1.8cm (H)

Battery: 1 x 3V button cell battery (included)

Casing: PVC leather casing (included)

PH Level Recommendations

1. For green leafy vegetables or flowering/fruiting plants, you may maintain the PH level between 5.0 - 6.5.

2. To decrease your PH level, add in some PH down into your water tank.

Caring for Product

1. Always rinse the tip of the tester under running water after each testing to prevent build up of minerals on the tip.

2. Apply some alcohol on cloth and wipe the tip of meter.

3. Recalibrate the meter If the measurements are fluctuating.

4. In the event the meter falls into the water, immediately retrieve the meter and off it. Remove the cap, battery cap, battery and leave it to dry for a few hours before testing out.

We at GreenBugs are firm believers and practitioners of premium affordable and quality, healthy farming for everyone. In order to keep the costs of purchase lower, we strive to design our systems to look elegant, be more efficient (reducing unnecessary parts) yet still functioning without compromising the quality of of overall system.